Singapore, 11 February 2020 – Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator.

At 2 metres long and 3.2 metres wide, with a surface area of about 2.25m², MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up to 20% compared to current single-aisle aircraft. The “blended wing body” configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience.

Launched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020.

“Airbus is leveraging emerging technologies to pioneer the future of flight. By testing disruptive aircraft configurations, Airbus is able to evaluate their potential as viable future products,” said Jean-Brice Dumont, EVP Engineering Airbus. “Although there is no specific time line for entry-into-service, this technological demonstrator could be instrumental in bringing about change in commercial aircraft architectures for an environmentally sustainable future for the aviation industry.”

Airbus is using its core strengths and capabilities of engineering and manufacturing, in close collaboration with an extended innovation ecosystem, to accelerate traditional research and development cycles. By doing this Airbus is able to achieve proof of concepts, at a convincing scale and speed, thereby driving forward maturity and increasing their value.

Through AirbusUpNext, a research programme, Airbus is currently working on a number of demonstrator projects in parallel; E-FAN X (hybrid-electric propulsion), fello’fly (v-shaped “formation” flight) and ATTOL (Autonomous Taxi Take-Off & Landing).

#Airbus #AirbusMAVERIC #SGAirshow2020 #innovation

 

For further information about the MAVERIC story, please click here.

Video News Release: please click here.

Visit our Singapore Airshow page to stay updated on Airbus presence at the Singapore Airshow.

Your contact

Matthieu Duvelleroy

External Communications - Airbus

Lois Benquet

External Communications - Airbus

Airbus reveals its blended wing aircraft demonstrator

Pdf309.46 KB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator.

MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls)

Jpg 7.41 MB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator. \n\n

MAVERIC 3D

Jpg 4.69 MB

MAVERIC 3D

Jpg 3.5 MB

MAVERIC take off

Jpg 2.33 MB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator. \n\n

MAVERIC CABIN

Jpg 2.2 MB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator. \n\nAt 2 metres long and 3.2 metres wide, with a surface area of about 2.25m², MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up-to 20 percent compared to current single-aisle aircraft. The “blended wing body” configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience. \n\nLaunched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020. \n

MAVERIC CABIN

Jpg 2.06 MB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator. \n\nAt 2 metres long and 3.2 metres wide, with a surface area of about 2.25m², MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up-to 20 percent compared to current single-aisle aircraft. The “blended wing body” configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience. \n\nLaunched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020. \n

MAVERIC CABIN

Jpg 1.81 MB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator. \n\nAt 2 metres long and 3.2 metres wide, with a surface area of about 2.25m², MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up-to 20 percent compared to current single-aisle aircraft. The “blended wing body” configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience. \n\nLaunched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020. \n

MAVERIC CABIN

Jpg 2.45 MB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator. \n\nAt 2 metres long and 3.2 metres wide, with a surface area of about 2.25m², MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up-to 20 percent compared to current single-aisle aircraft. The “blended wing body” configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience. \n\nLaunched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020. \n

AIRBUS VNR MAVERIC VIDEO

Mp4128.57 MB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator. \n\nAt 2 metres long and 3.2 metres wide, with a surface area of about 2.25m², MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up-to 20 percent compared to current single-aisle aircraft. The “blended wing body” configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience. \n\nLaunched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020. \n

MAVERIC 3D CABIN VIDEO

Mp446.5 MB

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator. \n\nAt 2 metres long and 3.2 metres wide, with a surface area of about 2.25m², MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up-to 20 percent compared to current single-aisle aircraft. The “blended wing body” configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience. \n\nLaunched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020. \n

Keywords